PriceList for Polarizer Lamination Machine - Max 600 Degree FFC FBA Hot Pressing Machine For Chip Soldering – Jiutu
PriceList for Polarizer Lamination Machine - Max 600 Degree FFC FBA Hot Pressing Machine For Chip Soldering – Jiutu Detail:
Max 600 Degree FFC FBA Hot Pressing Machine For Chip Soldering
Main Features :
1. This equipment adopts a pressure following mechanism to precisely control the pressure, and the welding products are fully dialyzed.
Working principle :
HotBar is usually a flexible board (FPC) soldered on the PCB, so that it can achieve the purpose of light, thin, short and small. In addition, the cost can be effectively reduced, because 1~2 flexible board connectors can be used less. The principle of the general HotBar hot press machine and the Haba machine is to use the huge Joule heat generated when a pulse current (pulse) flows through materials with high resistance properties such as molybdenum and titanium to heat the hot press head (thermodes/heater tip), and then borrow The solder paste already on the PCB is heated and melted by the thermal head to achieve the purpose of mutual welding. Since it is heated by pulse, the energy and time control of pulse is very important. The control method is to use the thermocouple circuit at the front end of the thermal indenter to feed back the temperature of the thermal indenter to the power control center in real time, so as to control the signal of the pulse. To ensure the correctness of the temperature on the thermal head.
Working area :
Model
|
HotBar Welding Machine
|
P/N
|
9TU-M039B
|
Heating Method
|
Pulse heating
|
Working Tempature
|
0℃ to 600℃
|
Working Humidity
|
40%–95%RH
|
Working Rated Power
|
2500W
|
Machine Size
|
64*55*57CM
|
Net Weight
|
85kg
|
Working Pressure
|
4–6kgf/cm2
|
Working Pressure
|
0.4-0.8Mpa
|
Volatge,Power Supply
|
220V 50Hz
|
Product detail pictures:
Related Product Guide:
Walmart’s Overpowered Gaming Laptop 17+ Review: Sam’s Choice, Not Ours | Industrial Robots
For Industrial Robots, Hacking Risks Are On the Rise | Assembly Machine
Sticking towards the principle of "Super High-quality, Satisfactory service" ,We've been striving to become a superb business partner of you for PriceList for Polarizer Lamination Machine - Max 600 Degree FFC FBA Hot Pressing Machine For Chip Soldering – Jiutu, The product will supply to all over the world, such as: Provence , Japan , Turin , All our staffs believe that: Quality builds today and service creates future. We know that good quality and the best service are the only way for us to achieve our customers and to achieve ourselves too. We welcome customers all over the word to contact us for future business relationships. Our products are the best. Once Selected, Perfect Forever!
By Elva from Azerbaijan - 2018.05.22 12:13
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Julia from Qatar - 2018.10.09 19:07